Tech Time Training

Name: 12:00PM EST – TT-212 DIAGNOSTIC TIPS AND TRICKS – STEP AWAY FROM POWER PROBE
Start: 2022-03-16T12:00:00-05:00
End: 2022-03-16T12:30:00-05:00

August 2020
August 19, 2020

TT-28 Current = Voltage Divided by Resistance…why do I need to know that? with Bill Kleckner

WATCH IT NOW!
August 26, 2020

TT-23 Calibration Checks, Aftermarket Flashes or Tuners with Scott MacWilliams

WATCH IT NOW!
September 2020
September 2, 2020

TT-62 Stop Those Leaks! Revisited with Reese Blalock and Curtis Haines of Permatex

GA, United States

WATCH IT NOW!
September 16, 2020|12:00 pmthru12:30 pm UTC-5

12:00 PM EST – TECH TIME TRAINING – READY FOR THE FUTURE IN AC SYSTEMS? REALLY, MAYBE, MAYBE NOT

Ready for the Future in AC Systems? Really - Maybe - Maybe Not presented by AAMCO Master Tech Dave Skora
September 16, 2020|3:00 pmthru3:30 pm UTC-5

3:00 PM EST – TECH TIME TRAINING – READY FOR THE FUTURE IN AC SYSTEMS? REALLY, MAYBE, MAYBE NOT

Ready for the future in AC Systems? Really - Maybe - Maybe Not Presented by AAMCO Master Tech Dave Skora
September 23, 2020|12:00 pmthru12:30 pm UTC-5

12:00 PM EST – TECH TIME TRAINING – OUR FUTURE WITH ADAS

Dave Skora, Master Technician, Certified Hybrid and EV Tech talks about the new ADAS Systems, why we cannot avoid knowing and repairing them if we want to stay in this […]
September 23, 2020|3:00 pmthru3:30 pm UTC-5

3:00 PM EST – TECH TIME TRAINING – OUR FUTURE WITH ADAS

Dave Skora, Master Technician, Certified Hybrid and EV Tech talks about the new ADAS Systems, why we cannot avoid knowing and repairing them if we want to stay in this […]
September 30, 2020|12:00 pmthru12:30 pm UTC-5

12:00 PM EST-TECH TIME TRAINING- WHY ARE THERE NO CODES YET – THE TRANSMISSION MISBEHAVES?

Reese Blalock covers symptoms with no codes such as 42RE -48RE with No OSS Signal, No Upshifts, various other systems such as- Limp mode or Failsafe conditions (often misdiagnosed, only […]
September 30, 2020|3:00 pmthru3:30 pm UTC-5

3:00 PM EST – TECH TIME TRAINING – WHY ARE THERE NO CODES YET – THE TRANMISSION MISBEHAVES?

Reese Blalock covering symptoms with no codes such as 42RE -48RE with no OSS signal, no Upshifts, various other systems such as- Limp mode or Failsafe conditions (often misdiagnosed, only […]
October 2020
October 7, 2020|12:00 pmthru12:30 pm UTC-5

12:00 PM EST – TECH TIME TRAINING – TURBO CHARGERS – THE NEW NORMAL

Bill Kleckner talks about what is inside of a turbocharger, how they work, and why are the manufacturers using them on most cars today. CLICK HERE TO REGISTER
October 7, 2020|3:00 pmthru3:30 pm UTC-5

3:00 PM EST – TECH TIME TRAINING – TURBO CHARGERS – THE NEW NORMAL

Bill Kleckner talks about what is inside a turbocharger, how they work, and why are the manufacturers using them on most cars today. CLICK HERE TO REGISTER
October 13, 2020|5:00 pmthruOctober 14, 2020|7:00 pm UTC-5

VIRTUAL TRAINING CLASS- CVT TRAINING

Training Dates: * October 13th, 2020 - Day 1 – 5PM - 7PM EST. * October 14th, 200 - Day 2 – 5PM - 7PM EST. Day 1 – 2+ […]
October 21, 2020|12:00 pmthru12:30 pm UTC-5

12:00 PM EST – TECH TIME TRAINING – GDI and Carbon Build Up , How to Deal with the New Dilemma

Scott MacWilliams, Master Support Tech reviews GDI systems and why the can bring new found profitable services to our centers
October 21, 2020|3:00 pmthru3:30 pm UTC-5

3:00 PM EST – TECH TIME TRAINING – GDI and Carbon Build Up , How to Deal with the New Dilemma

Scott MacWilliams, Master Support Tech reviews GDI systems and why the can bring new found profitable services to our centers
October 28, 2020|6:00 pmthru8:00 pm UTC-5

5:00 PM EST – VIRTUAL CVT HANDS ON TRAINING IN SPAINSH

VIRTUAL CVT HANDS-ON TRAINING IN SPANISH WITH REESE BLALOCK CLICK HERE TO REGISTER
November 2020
November 4, 2020|3:00 pmthru3:30 pm UTC-5

TT-113 Yaw made the vehicle do that? with Reese Blalock

GA, United States

WATCH NOW!
November 10, 2020|5:00 pmthru7:00 pm UTC-5

5:00 PM EST – CVT JF010E VIRTUAL HANDS ON TRAINING – DAY 1

CVT - JF010E VIRTUAL HANDS-ON TRAINING
November 11, 2020|5:00 pmthru7:00 pm UTC-5

5:00 PM EST – CVT JF010E VIRTUAL HANDS ON TRAINING – DAY 2

CVT JF010E VIRTUAL HANDS-ON TRAINING - DAY 2
November 18, 2020|12:00 pm UTC-5

12:00 PM EST – TECH TIME TRAINING-WHY ENGINE LOAD SENSORS AFFECTS TRANSMISSION HEALTH

Bill Kleckner Master Tech and Builder covers the most important factor affecting transmission performance and longevity - Load. What is it, how do we measure it, what controls it, and […]
November 18, 2020|3:00 pmthru3:30 pm UTC-5

3:00 PM EST – TECH TIME TRAINING-WHY ENGINE LOAD SENSORS AFFECTS TRANSMISSION HEALTH

Bill Kleckner Master Tech and Builder covers the most important factor affecting transmission performance and longevity. Load. What is it, how do we measure it, what controls it, and how […]
December 2020
December 2, 2020|12:00 pmthru12:30 pm UTC-5

12:00 PM EST – TECH TIME TRAINING – Start Stop Technology and What Adaptations are Required before Driving

Dave Skora Advanced level Master Technician gives us some information on Start-Stop Technology and What are the requirements to make sure the Actuators and Pressure accumulators are ready for the […]
December 2, 2020|3:00 pmthru3:30 pm UTC-5

3:00 PM EST – TECH TIME TRAINING – Start Stop Technology and What Adaptations are Required before Driving

Dave Skora Advanced level Master Technician gives us some information on Start-Stop Technology and, What are the requirements to make sure the Actuators and Pressure accumulators are ready for the […]
December 9, 2020|5:00 pmthru7:00 pm UTC-5

JF010E HANDS ON CLASS SPANISH VERSION
December 9, 2020|5:00 pmthru7:00 pm UTC-5

JF010E HANDS ON CLASS SPANISH VERSION
December 16, 2020|12:00 pmthru12:30 pm UTC-5

12:00 PM EST TECH TIME TRAINING – TEST DRIVE FOR AN ACCURATE DIAGNOSIS

Test Drive for an Accurate Diagnosis. Presented by AAMCO Master Technician, Reese Blalock CLICK HERE TO REGISTER
December 16, 2020|3:00 pmthru3:30 pm UTC-5

3:00 PM EST TECH TIME TRAINING – TEST DRIVE FOR AN ACCURATE DIAGNOSIS

Test Drive for an Accurate Diagnosis with Reese Blalock CLICK HERE TO REGISTER
January 2021
January 13, 2021|12:00 pmthru12:30 pm UTC-5

12:00 PM TECH TIME: TT-127 SHORT WORK WITH CIRCUIT CODES

Dave Skora, Master Technician, and Certified Hybrid and EV Tech gives us quick and easy ways to discover where the short is in the circuit and what is the proper […]
January 13, 2021|3:00 pmthru3:30 pm UTC-5

3:00 PM TECH TIME: TT-127 SHORT WORK WITH CIRCUIT CODES

Dave Skora, Master Technician,CLICK HERE TO REGISTER and Certified Hybrid and EV Tech gives us quick and easy ways to discover where the short is in the circuit and what […]
January 20, 2021|12:00 pmthru12:30 pm UTC-5

12:00 PM EST TECH TIME: TT-134 STEERING ANGLE AFFECTS TRANSMISSION PERFORMANCE?

Reese Blalock, Master Support Tech and Master Builder describes how Steering Angles can affect transmission performance CLICK HERE TO REGISTER
January 20, 2021|3:00 pmthru3:30 pm UTC-5

3:00 PM EST TECH TIME- TT-134 STEERING ANGLE CAN AFFECT TRANSMISSION PERFORMANCE

Reese Blalock, Master Support Tech and Master Builder describes how Steering Angles can affect transmission performance CLICK HERE TO REGISTER
January 26, 2021|5:00 pmthru8:00 pm UTC-5

VIRTUAL HANDS ON – VOLUME 3 DAY 2 CVT

CLICK HERE TO REGISTER
January 27, 2021|5:00 pmthru7:00 pm UTC-5

VIRTUAL HANDS ON – VOLUME 3 DAY 1 – CVT

CLICK HERE TO REGISTER
February 2021
February 3, 2021|5:00 pmthru7:00 pm UTC-5

VT-3-S JATCO JF010E RE0F09A RE0F09B CVT3 Virtual HandsOn Spanish VIEW NOW!

Bienvenido al tercer curso en una serie de entrenamientos virtuales directo de AAMCO University. Este segmento es complementario a los cursos anteriores en inglés, que, tambien cubrió la teoría de […]
February 10, 2021|12:00 pmthru12:30 pm UTC-5

TT-116 Quick Diagnostic Tips for Dodge 46, 47, 48RE VIEW NOW!

Dave Skora takes the frustration out of diagnosing Dodge truck transmissions CLICK TO VIEW NOW!
February 17, 2021|12:00 pmthru12:30 pm UTC-5

TT-184 Transmission Diagnostics – Internal vs External with Bill Kleckner VIEW NOW!

Bill Kleckner Master Tech and Builder covers how to determine when its time to Remove, Disassemble and Inspect a transmission to discover an internal issue that is causing the problem […]
February 24, 2021|12:00 pmthru12:30 pm UTC-5

TT-117 PIDS – What’s a PID and Why Do I Need To Know That with Reese Blalock VIEW NOW!

Reese Blalock, Master Diagnostician, explains what a PID is , What are they used for and why it is important to select the correct ones to scrutinize while determining drive-train […]
March 2021
March 3, 2021|12:00 pmthru12:30 pm UTC-5

TT-101 4R100 Drum Differences and Why it Matters with Scott MacWilliams VIEW NOW!

Scott MacWilliams Master Technician, Builder, and CVT expert, will go over the technical aspects of the Ford 4R100 transmissions and why they have parts that may not be interchangeable. CLICK […]
March 10, 2021|6:00 pmthru8:00 pm UTC-5

VT-4 SDD- Strategy Directed Diagnostics VIEW NOW!

Dave Skora Master Technician and Diagnostician explains How to Diagnose using Strategy Directed Diagnostics CLICK TO VIEW NOW!
March 17, 2021|12:00 pmthru12:30 pm UTC-5

TT-186 6L80 6L90 Clutch Failures VIEW NOW!

Bill Kleckner Master Tech and Builder covers how the 1,2,3,4, 35R, and 4,5,6 clutches are the most commonly applied components to experience problems. CLICK TO VIEW NOW!
March 24, 2021|12:00 pmthru12:30 pm UTC-5

TT-189 Engine Misfires Causing a Transmission Symptom? VIEW NOW!

Reese Blalock, Master Diagnostician, explains why an Engine Misfire can cause transmission problems including shudders CLICK TO VIEW NOW!
March 31, 2021|12:00 pmthru12:30 pm UTC-5

TT-190 Replacing Stepper Motors May Be A Waste of Time with Scott MacWilliams VIEW NOW!

Scott MacWilliams Master Technician, Builder, and CVT expert will go over the Jatco Stepper Motor and why replacing it may be a waste of money and time to repair those […]
April 2021
April 7, 2021|12:00 pmthru12:30 pm UTC-5

TT-191 Understanding and Diagnosing Code P0882 with Dave Skora VIEW NOW!

Dave Skora Master Technician and Diagnostician will explain why some Chrysler TIPMs have problems and may throw a P)882 code and what to do about it. CLICK TO VIEW NOW!
April 14, 2021|8:00 amthru5:00 pm UTC-5

TT-125 Mechanical, Electrical, or Programming – It’s got be one or the other!

TT-125 Mechanical, Electrical, or Programming – It’s got be one or the other!
August 2021
August 25, 2021

VT-8 Virtual Hands-On 6F35/6T45 Rebuilding

CLICK HERE TO VIEW NOW
September 2021
September 1, 2021|12:00 amthru11:59 pm UTC-5

VT-8-S 6T40/6F35 Virtual Hands-On Rebuilding Class SPANISH

CLICK HERE TO VIEW NOW
September 15, 2021

TT-188 Problems with the Chrysler TIPM. Can it be Repaired?

CLICK HERE TO VIEW NOW
September 22, 2021

TT-194 Codes P0729-P0736 What do they have in common?

CLICK HERE TO VIEW NOW
September 29, 2021

VT-9 Virtual Hands-On U660E/U760E Rebuilding

CLICK HERE TO VIEW NOW
October 2021
October 6, 2021

VT-9-S Virtual Hands-On U660E/U760E Rebuilding SPANISH

CLICK HERE TO REGISTER
October 13, 2021|12:00 pmthru12:30 pm UTC-5

TT-195 Transmission Code P0218 is Telling You More Than You Think

CLICK HERE TO VIEW NOW
October 20, 2021

TT-193 Using Hydraulics Flow Charts Can Be Helpful In Pinpointing The Problem

CLICK HERE TO VIEW NOW
October 27, 2021

TT-202 Torque Management Explained

CLICK HERE TO VIEW NOW
November 2021
November 3, 2021|12:00 pmthru12:30 pm UTC-5

TT-200 – Understanding the 6T40 6T45 Transmission Parts and Problems

CLICK HERE TO VIEW NOW
November 10, 2021|12:00 pmthru12:30 pm UTC-5

TT-197- Let’s Take a Look Inside Ford’s 10R80 10 Speed Transmission

CLICK HERE TO VIEW NOW
November 17, 2021|12:00 pmthru12:30 pm UTC-5

TT -198 – What are the differences between Chrysler 845RE vs ZF8HP?

CLICK HERE TO VIEW NOW
December 2021
December 1, 2021|12:00 pmthru12:30 pm UTC-5

TT-257 – Symptoms of a Failing Transmission Pump

CLICK HERE TO VIEW NOW
December 8, 2021|12:00 pmthru12:30 pm UTC-5

TT-201 – Discovering when a Voltage drop is a Good Thing

CLICK HERE TO VIEW NOW
December 15, 2021|12:00 pmthru12:30 pm UTC-5

TT-258 – Gateway Module Diagnostics

CLICK HERE TO VIEW NOW
January 2022
January 5, 2022|12:00 pmthru12:30 pm UTC-5

12:00 PM EST – TT-199 DIAGNOSTIC TIPS & TRICKS – 62TE

Common problems with the 62TE and how looking at Essential PIDs, pressures, and other tips and tricks can speed up diagnostics. CLICK HERE TO REGISTER
January 12, 2022

TT-204 845RE ZF8HP45 ZF8HP70 Common Problems with Dave Skora

Dave Skora, Master builder, and Diagnostician gives a peek at an upcoming hands-on class and covers some popular problems reported on these 8-speed units. CLICK TO WATCH NOW!
January 19, 2022|12:00 pmthru12:30 pm UTC-5

12:00 PM EST – TT-203 DIAGNOSTIC TIPS & TRICKS – U140 CODE AND WHAT IT MEANS

Common problems with the U140 Series and how looking at Essential PIDs, pressures, and other tips and tricks can speed up diagnostics. CLICK HERE TO REGISTER
January 26, 2022

TT-205 Diagnostic Tips and Tricks – No Move, No Codes with Dave Skora

Tips & tricks to diagnose a transmission with no move & no code WATCH NOW!
February 2022
February 2, 2022|12:00 pmthru12:30 pm UTC-5

12:00 PM EST-TT 206 – DIAGNOSTIC TIPS AND TRICKS WRONG STARTS NO CODE

Bill Kleckner, Master Technician, and Master Builder discuss tips & tricks to diagnose a transmission with a high gear start & no code] CLICK HERE TO REGISTER
February 2, 2022|3:00 pmthru3:30 pm UTC-5

3:00 PM EST-TT 206 – DIAGNOSTIC TIPS AND TRICKS WRONG STARTS NO CODE

Bill Kleckner, Master Technician, and Master Builder discuss tips & tricks to diagnose a transmission with a high gear start & no code] CLICK HERE TO REGISTER
February 9, 2022|12:00 pmthru12:30 pm UTC-5

12:00 PM EST – TT 207 – DIAGNOSTIC TIPS AND TRICKS – INSIDE THE DPS6

Reese Blalock Support Technician and Diagnostician discusses common problems with the DPS6 and how looking at Essential PIDs, pressure and other tips and tricks can speed up diagnostics. CLICK HERE […]
February 9, 2022|3:00 pmthru3:30 pm UTC-5

3:00 PM EST – TT 207 – DIAGNOSTIC TIPS AND TRICKS – INSIDE THE DPS6

Reese Blalock Support Technician and Diagnostician discusses common problems with the DPS6 and how looking at Essential PIDs, pressure and other tips and tricks can speed up diagnostics. CLICK HERE […]
February 16, 2022|12:00 pmthru12:30 pm UTC-5

12:00 PM EST – TT 208 – DIAGNOSTIC TIPS AND TRICKS – REVERSE AND FIRST ONLY, NO CODES

Scott MacWilliams, Master Technician, and Diagnostician reviews the tips & tricks to diagnose a transmission with first and reverse only & no code] CLICK HERE TO REGISTER
February 16, 2022|3:00 pmthru3:30 pm UTC-5

3:00 PM EST – TT 208 – DIAGNOSTIC TIPS AND TRICKS – REVERSE AND FIRST ONLY, NO CODES

Scott MacWilliams, Master Technician, and Diagnostician reviews the tips & tricks to diagnose a transmission with first and reverse only & no code] CLICK HERE TO REGISTER
February 23, 2022|12:00 pmthru12:30 pm UTC-5

12:00 PM EST – TT 209 – DIAGNOSTIC TIPS AND TRICKS YOUR PRESSURE GAUGE CAN PERFORM

Dave Skora Master Technician and Diagnostician share the tips & tricks your pressure gauge can perform. CLICK HERE TO REGISTER
February 23, 2022|3:00 pmthru3:30 pm UTC-5

3:00 PM EST – TT 209 – DIAGNOSTIC TIPS AND TRICKS YOUR PRESSURE GAUGE CAN PERFORM

Dave Skora Master Technician and Diagnostician share the tips & tricks your pressure gauge can perform. CLICK HERE TO REGISTER
March 2022
March 2, 2022|5:00 pmthru8:00 pm UTC-5

5PM-8PM EST – VT-10-GM 6L80 VIRTUAL HANDS ON TRAINING – PART 1

Objectives of this training class are to: understand the 6L80 automatic transmissions system theory and function, experience the proper disassembly, inspection, assembly, and testing techniques to allow efficient and effective […]
March 3, 2022|5:00 pmthru8:00 pm UTC-5

5PM-8PM EST – VT-10-GM 6L80 VIRTUAL HANDS ON TRAINING – PART 2

Objectives of this training class are to: understand the 6L80 automatic transmissions system theory and function, experience the proper disassembly, inspection, assembly, and testing techniques to allow efficient and effective […]
March 9, 2022|5:00 pmthru8:00 pm UTC-5

5PM-8PM EST – VT-105 GM 6L80 VIRTUAL HANDS ON – SPANISH PART 1

Objectives of this training class are to: understand the 6L80 automatic transmissions system theory and function, experience the proper disassembly, inspection, assembly, and testing techniques to allow efficient and effective […]
March 10, 2022|5:00 pmthru8:00 pm UTC-5

5PM-8PM EST – VT-105 GM 6L80 VIRTUAL HANDS ON – SPANISH PART 2

Objectives of this training class are to: understand the 6L80 automatic transmissions system theory and function, experience the proper disassembly, inspection, assembly, and testing techniques to allow efficient and effective […]
March 16, 2022|12:00 pmthru12:30 pm UTC-5

12:00PM EST – TT-212 DIAGNOSTIC TIPS AND TRICKS – STEP AWAY FROM POWER PROBE

Step away from the Power Probe & Test circuit operations the right way. CLICK HERE TO REGISTER