3:00 PM EST – TECH TIME TRAINING – USING A VE CALCULATOR & WHY
Scott MacWilliams Master Technician, Builder and CVT expert, explains VE or Volumetric Efficiency. What does that mean, why is it so important, and how do I measure it.
75 events found.
Tech Time Training
-
-
12:00 PM EST TECH TIME: DIAGNOSING WITH VACUUM
Bill Kleckner Master Tech and Builder discusses using vacuum readings to diagnose engine issues and how those reading can help with transmission performance woes.
-
3:00 PM EST TECH TIME: DIAGNOSING WITH VACUUM
Bill Kleckner Master Tech and Builder discusses using vacuum readings to diagnose engine issues and how those reading can help with transmission performance woes
-
TECHNICAL HANDS ON TRAINING: SCAN / SCOPE DIAGNOSTICS AND 6 SPEED TRANSMISSIONS
LA MIRADA PEP BOYS 12251 LA MIRADA BLVD, LA MIRADA, CA, United States3 days of Technical Hands-On Training: 3/12 - Scan and Scope Diagnostics, 3/13-3/14 - 6 Speed Transmissions
-
12:00 PM EST TECH TIME: HIGH PRESSURE SMOKE DIAGNOSTICS
Reese Blalock, Master Support Tech and Master Builder will describe how the newer Smoke machines now have high-pressure options and why smoke is a good thing when diagnosing difficult problems.
-
3:00 PM EST TECH TIME: HIGH PRESSURE SMOKE DIAGNOSTICS
Reese Blalock, Master Support Tech and Master Builder describes how the newer Smoke machines now have high-pressure options and why smoke is a good thing when diagnosing difficult problems
-
12:00 PM EST – TECH TIME TRAINING – Parasitic Draw Tests on Vehicles with CAN (Controller Area Network)
Dave Skora, our Master Support Diagnostic Technician, explains how to help you quickly and efficiently diagnose parasite draw problems on late-model vehicles. All late-model vehicles are loaded with dozens of […]
-
3:00 PM EST – TECH TIME TRAINING -Parasitic Draw Tests on Vehicles with CAN (Controller Area Network)
Dave Skora, our Master Support Diagnostic Technician, explains how to help you quickly and efficiently diagnose parasite draw problems on late-model vehicles. All late-model vehicles are loaded with dozens of […]
-
12:00 PM EST -New AAMCO University E-Learning Platform Overview
New AAMCO University E-Learning Platform Overview CLICK HERE TO VIEW
-
12:00 PM EST TECH TRAINING: CAN NETWORKS EXPLAINED
Jim Eberhart, Master Support Tech and Builder reviews what is all this talk about Can Networks and how a single wire network can move so much information. CLICK HERE TO […]
-
3:00 PM EST TECH TIME: CAN NETWORKS EXPLAINED
Jim Eberhart, Master Support Tech and Builder reviews what is all this talk about Can NEtworks and how a single wire network can move so much information. CLICK HERE TO […]
-
12:00 PM EST TECH TIME: R1234YF A/C SYSTEMS – CHANGES TO THE SYSTEM AND REQUIREMENTS
Bill Kleckner Master Tech and Builder discusses The new refrigerant showing up in vehicles today, the special equipment necessary, and what to watch out for when servicing these vehicles CLICK […]
-
3:00 PM EST TECH TRAINING: R1234YF A/C SYSTEMS- CHANGES TO THE SYSTEM AND REQUIREMENTS
Bill Kleckner Master Tech and Builder discusses The new refrigerant showing up in vehicles today, the special equipment necessary, and what to watch out for when servicing these vehicles CLICK […]
-
12:00 PM EST TECH TIME TRAINING – ZF 8 SPEED D CLUTCH COMMON PROBLEMS
Aamco University 1963 Aamco Dr, Newnan, GA, United StatesDave Skora working wIth special guest Tim Ensign from TransTec, explains the problems and special fixes available for the ZF 8 speed found in many popular vehicles today CLICK HERE […]
-
3:00 PM EST TECH TIME TRAINING – ZF 8 SPEED D CLUTCH COMMON PROBLEMS
Aamco University 1963 Aamco Dr, Newnan, GA, United StatesDave Skora working wIth special guest Tim Ensign from TransTec, explains the problems and special fixes available for the ZF 8 speed found in many popular vehicles today CLICK HERE […]
-
12:00 PM EST TECH TIME: DON’T OHM, FIND THE DROP
Dave Skora, Master Technician, Certified Hybrid and EV Tech will go over the pros and cons of checking for continuity in a wire vs measuring voltage drop at the load. […]
-
3:00 PM EST TECH TIME: DON’T OHM, FIND THE DROP
Dave Skora, Master Technician, Certified Hybrid and EV Tech will go over the pros and cons of checking for continuity in a wire vs measuring voltage drop at the load. […]
-
12:00 PM EST – TECH TIME- A TOUR OF THE NEW AAMCO E LEARNING PLATFORM
This week's Tech Time takes you on a tour of the New AAMCO Learning Management platform. We will review all the training/resources and functionality of the new site. Along with […]
-
3:00 PM EST – TECH TIME – A TOUR OF THE NEW AAMCO E-LEARNING PLATFORM
This week's Tech Time takes you on a tour of the New AAMCO Learning Management platform. We will review all the training/resources and functionality of the new site. Along with […]
-
12:00 PM EST TECH TIME: BASICS ARE CALLED BASICS FOR A REASON
Scott MacWilliams Master Technician, Builder, and CVT expert will go over the technical reasons why basics are so important and why skipping past the no brainer but time-consuming checks could […]
-
3:00 PM EST TECH TIME: BASICS ARE CALLED BASICS FOR A REASON
Scott MacWilliams Master Technician, Builder, and CVT expert will go over the technical reasons why basics are so important and why skipping past the no brainer but time-consuming checks could […]
-
12:00 PM EST TECH TIME: NO MORE TUNE UP MYTH – FACT OR FICTION
Dave Skora, Master Technician, and Certified Hybrid and EV Tech will talk about the modern tune-up. What, where and how do you do that to make a difference in performance […]
-
3:00 PM EST TECH TIME: NO MORE TUNE UP MYTH – FACT OR FICTION
Dave Skora, Master Technician, and Certified Hybrid and EV Tech will talk about the modern tune-up. What, where and how do you do that to make a difference in performance. […]
-
12:00 PM EST – TECH TIME TRAINING – GM Transmissions – PUN, TUN and you’re DUN. Pun intended
For some technicians, changes with newer GM transmissions have raised some questions about terms, PUN - Part Unique Number and TUN - Transmission Unique Number. Master Rebuilder Reese Blalock will […]
-
3:00 PM EST – TECH TIME TRAINING – GM Transmissions – PUN, TUN and you’re DUN. Pun intended
For some technicians, changes with newer GM transmissions have raised some questions about terms, PUN - Part Unique Number and TUN - Transmission Unique Number. Master Rebuilder Reese Blalock will […]
-
12:00 PM EST TECH TIME: TIMING CHECK, REALLY? WHY, HOW?
Jim Eberhart, Master Support Tech and Builder reviews timing, what timing means today and whether or no checking it really makes sense. CLICK HERE TO REGISTER
-
3:00 PM EST TECH TIME TIMING CHECK, REALLY? WHY, HOW?
Jim Eberhart, Master Support Tech and Builder reviews timing, what timing means today and whether or no checking it really makes sense.
-
-
-
3:00 PM EST TECH TIME TRAINING – Repairing vs Replacing Modules saves time and money
Repairing vs. Replacing Modules Saves Time and Money with Dave Skora CLICK HERE TO REGISTER
-
12:00 PM EST – TECH TIME TRAINING – Pressure Testing for Performance
Pressure Testing for Performance with Master Technician, Reese Blalock CLICK HERE TO REGISTER
-
3:00 PM EST – TECH TIME TRAINING – Pressure Testing for Performance
Pressure Testing for Performance with Reese Blalock CLICK HERE TO REGISTER
-
TT-158 Fuse Box Diagnostics with Scott MacWilliams WATCH NOW!
Scott MacWilliams Master Technician, Builder, and CVT expert will go over the possibility of diagnosing straight from the fuse box and what exactly can you find by doing just that. […]
-
TT-64 Transfer Case Components with Reese Blalock WATCH NOW!
A quick look with AAMCO Master Technician Reese Blalock, at how Transfer Case Components have changed, and how recognizing this can help tremendously with accurate diagnostics. WATCH NOW!
-
TT-159 Why Are All Modules Important with Reese Blalock WATCH NOW!
Reese Blalock, Master Support Tech and Master Builder describes how every module in a vehicle is important to the performance of every system. How to diagnose issues and what to […]
-
TT-169 Inside the ZF6HP / 6R60 Transmission
WATCH IT NOW!
-
-
-
-
-
-
12:00 PM EST – TECH TIME TRAINING – READY FOR THE FUTURE IN AC SYSTEMS? REALLY, MAYBE, MAYBE NOT
Ready for the Future in AC Systems? Really - Maybe - Maybe Not presented by AAMCO Master Tech Dave Skora
-
3:00 PM EST – TECH TIME TRAINING – READY FOR THE FUTURE IN AC SYSTEMS? REALLY, MAYBE, MAYBE NOT
Ready for the future in AC Systems? Really - Maybe - Maybe Not Presented by AAMCO Master Tech Dave Skora
-
12:00 PM EST – TECH TIME TRAINING – OUR FUTURE WITH ADAS
Dave Skora, Master Technician, Certified Hybrid and EV Tech talks about the new ADAS Systems, why we cannot avoid knowing and repairing them if we want to stay in this […]
-
3:00 PM EST – TECH TIME TRAINING – OUR FUTURE WITH ADAS
Dave Skora, Master Technician, Certified Hybrid and EV Tech talks about the new ADAS Systems, why we cannot avoid knowing and repairing them if we want to stay in this […]
-
12:00 PM EST-TECH TIME TRAINING- WHY ARE THERE NO CODES YET – THE TRANSMISSION MISBEHAVES?
Reese Blalock covers symptoms with no codes such as 42RE -48RE with No OSS Signal, No Upshifts, various other systems such as- Limp mode or Failsafe conditions (often misdiagnosed, only […]
-
3:00 PM EST – TECH TIME TRAINING – WHY ARE THERE NO CODES YET – THE TRANMISSION MISBEHAVES?
Reese Blalock covering symptoms with no codes such as 42RE -48RE with no OSS signal, no Upshifts, various other systems such as- Limp mode or Failsafe conditions (often misdiagnosed, only […]
-
12:00 PM EST – TECH TIME TRAINING – TURBO CHARGERS – THE NEW NORMAL
Bill Kleckner talks about what is inside of a turbocharger, how they work, and why are the manufacturers using them on most cars today. CLICK HERE TO REGISTER
-
3:00 PM EST – TECH TIME TRAINING – TURBO CHARGERS – THE NEW NORMAL
Bill Kleckner talks about what is inside a turbocharger, how they work, and why are the manufacturers using them on most cars today. CLICK HERE TO REGISTER
-
VIRTUAL TRAINING CLASS- CVT TRAINING
Training Dates: * October 13th, 2020 - Day 1 – 5PM - 7PM EST. * October 14th, 200 - Day 2 – 5PM - 7PM EST. Day 1 – 2+ […]
-
12:00 PM EST – TECH TIME TRAINING – GDI and Carbon Build Up , How to Deal with the New Dilemma
Scott MacWilliams, Master Support Tech reviews GDI systems and why the can bring new found profitable services to our centers
-
3:00 PM EST – TECH TIME TRAINING – GDI and Carbon Build Up , How to Deal with the New Dilemma
Scott MacWilliams, Master Support Tech reviews GDI systems and why the can bring new found profitable services to our centers
-
5:00 PM EST – VIRTUAL CVT HANDS ON TRAINING IN SPAINSH
VIRTUAL CVT HANDS-ON TRAINING IN SPANISH WITH REESE BLALOCK CLICK HERE TO REGISTER
-
-
5:00 PM EST – CVT JF010E VIRTUAL HANDS ON TRAINING – DAY 1
CVT - JF010E VIRTUAL HANDS-ON TRAINING
-
5:00 PM EST – CVT JF010E VIRTUAL HANDS ON TRAINING – DAY 2
CVT JF010E VIRTUAL HANDS-ON TRAINING - DAY 2
-
12:00 PM EST – TECH TIME TRAINING-WHY ENGINE LOAD SENSORS AFFECTS TRANSMISSION HEALTH
Bill Kleckner Master Tech and Builder covers the most important factor affecting transmission performance and longevity - Load. What is it, how do we measure it, what controls it, and […]
-
3:00 PM EST – TECH TIME TRAINING-WHY ENGINE LOAD SENSORS AFFECTS TRANSMISSION HEALTH
Bill Kleckner Master Tech and Builder covers the most important factor affecting transmission performance and longevity. Load. What is it, how do we measure it, what controls it, and how […]
-
12:00 PM EST – TECH TIME TRAINING – Start Stop Technology and What Adaptations are Required before Driving
Dave Skora Advanced level Master Technician gives us some information on Start-Stop Technology and What are the requirements to make sure the Actuators and Pressure accumulators are ready for the […]
-
3:00 PM EST – TECH TIME TRAINING – Start Stop Technology and What Adaptations are Required before Driving
Dave Skora Advanced level Master Technician gives us some information on Start-Stop Technology and, What are the requirements to make sure the Actuators and Pressure accumulators are ready for the […]
-
-
-
12:00 PM EST TECH TIME TRAINING – TEST DRIVE FOR AN ACCURATE DIAGNOSIS
Test Drive for an Accurate Diagnosis. Presented by AAMCO Master Technician, Reese Blalock CLICK HERE TO REGISTER
-
3:00 PM EST TECH TIME TRAINING – TEST DRIVE FOR AN ACCURATE DIAGNOSIS
Test Drive for an Accurate Diagnosis with Reese Blalock CLICK HERE TO REGISTER
-
12:00 PM TECH TIME: TT-127 SHORT WORK WITH CIRCUIT CODES
Dave Skora, Master Technician, and Certified Hybrid and EV Tech gives us quick and easy ways to discover where the short is in the circuit and what is the proper […]
-
3:00 PM TECH TIME: TT-127 SHORT WORK WITH CIRCUIT CODES
Dave Skora, Master Technician,CLICK HERE TO REGISTER and Certified Hybrid and EV Tech gives us quick and easy ways to discover where the short is in the circuit and what […]
-
12:00 PM EST TECH TIME: TT-134 STEERING ANGLE AFFECTS TRANSMISSION PERFORMANCE?
Reese Blalock, Master Support Tech and Master Builder describes how Steering Angles can affect transmission performance CLICK HERE TO REGISTER
-
3:00 PM EST TECH TIME- TT-134 STEERING ANGLE CAN AFFECT TRANSMISSION PERFORMANCE
Reese Blalock, Master Support Tech and Master Builder describes how Steering Angles can affect transmission performance CLICK HERE TO REGISTER
-
VIRTUAL HANDS ON – VOLUME 3 DAY 2 CVT
CLICK HERE TO REGISTER
-
VIRTUAL HANDS ON – VOLUME 3 DAY 1 – CVT
CLICK HERE TO REGISTER
-
VT-3-S JATCO JF010E RE0F09A RE0F09B CVT3 Virtual HandsOn Spanish VIEW NOW!
Bienvenido al tercer curso en una serie de entrenamientos virtuales directo de AAMCO University. Este segmento es complementario a los cursos anteriores en inglés, que, tambien cubrió la teoría de […]
-
TT-116 Quick Diagnostic Tips for Dodge 46, 47, 48RE VIEW NOW!
Dave Skora takes the frustration out of diagnosing Dodge truck transmissions CLICK TO VIEW NOW!
-
TT-184 Transmission Diagnostics – Internal vs External with Bill Kleckner VIEW NOW!
Bill Kleckner Master Tech and Builder covers how to determine when its time to Remove, Disassemble and Inspect a transmission to discover an internal issue that is causing the problem […]
-
TT-117 PIDS – What’s a PID and Why Do I Need To Know That with Reese Blalock VIEW NOW!
Reese Blalock, Master Diagnostician, explains what a PID is , What are they used for and why it is important to select the correct ones to scrutinize while determining drive-train […]
-
TT-101 4R100 Drum Differences and Why it Matters with Scott MacWilliams VIEW NOW!
Scott MacWilliams Master Technician, Builder, and CVT expert, will go over the technical aspects of the Ford 4R100 transmissions and why they have parts that may not be interchangeable. CLICK […]